Extech Instruments MN16A User's Guide

User's Guide Autoranging Mini Multimeter Model MN16A

MN16A V1.4 03/12 10AUTORANGING/MANUAL RANGE SELECTION When the meter is first turned on, it automatically goes into Autoranging. This automatically

MN16A V1.4 03/12 11Maintenance WARNING: To avoid electric shock, disconnect the test leads from any source of voltage before removing the back cov

MN16A V1.4 03/12 12Specifications Function Range Resolution Accuracy 4V 0.001V 40V 0.01V 400V 0.1V ±(1.2% reading + 2 digits) DC Voltage (V DC) 60

MN16A V1.4 03/12 13Function Range Resolution Accuracy 5.000Hz 0.001Hz 50.00Hz 0.01Hz ±(1.5% reading + 5 digits) 500.0Hz 0.1Hz 5.000kHz 0.001kHz 50

MN16A V1.4 03/12 14Support lines: U.S. 877-439-8324, Intl. 603-324-7800 Technical support: Option 3; E-mail: [email protected] Repair & Return

MN16A V1.4 03/12 2Introduction Congratulations on your purchase of the Extech MN16A Autoranging Multimeter. This meter measures AC/DC Voltage, AC/D

MN16A V1.4 03/12 3CAUTIONS • Improper use of this meter can cause damage, shock, injury or death. Read and understand this user manual before oper

MN16A V1.4 03/12 4SAFETY INSTRUCTIONS This meter has been designed for safe use, but must be operated with caution. The rules listed below must be

MN16A V1.4 03/12 5Controls and Jacks 1. 4,000 count LCD display 2. MODE button 3. HOLD button 4. Function switch 5. COM input jack 6. 10A input

MN16A V1.4 03/12 6Operating Instructions WARNING: Risk of electrocution. High-voltage circuits, both AC and DC, are very dangerous and should be me

MN16A V1.4 03/12 7DC CURRENT MEASUREMENTS CAUTION: Do not make 20A current measurements for longer than 30 seconds. Exceeding 30 seconds may cause

MN16A V1.4 03/12 8RESISTANCE MEASUREMENTS WARNING: To avoid electric shock, disconnect power to the unit under test and discharge all capacitors be

MN16A V1.4 03/12 9TEMPERATURE MEASUREMENTS 1. Set the function switch to the ºF or ºC position. 2. Insert the Temperature Probe into the input ja