Extech Instruments AN500 User's Guide download pdf (Page 6)

AN500-en-EU_V1.7 9/14

Zero Adjustment

Press and hold the ZERO button for 1 second to zero the reading.

Backlight

Press the Zero/BL button at any time to turn on/off the backlight.

Airflow Parameters Settings

1. While in airflow measurement mode press and hold SET for 1 second to enter next step.

2. Momentarily press the ►or ◄ button to choose circle or rectangle function.

3. Press SET to enter next step.

4. Press ▲ or ▼ to adjust R in circle mode or L and W in rectangle mode. Adjustment will be from

1.5 to 101.5 cm in CMM mode or 0.6 to 40.0 in CFM mode.

5. Press SET to enter next step.

6. Press ▲ or ▼ to adjust GAIN from 0.10-1.00. (default 1.00)

7. Press and hold the SET button for 1 second to store the settings in non-volatile memory and

return to the normal measurement mode. Or press the SET to return normal operation. The

airflow parameters will reset to the previous setting when next on.

8. While in Airflow parameters setting, the unit will return to normal operation if no button is

pressed for 8 seconds. The data will not be stored.

1 2 3 4 5 6 7 8 9

No comments

Marke: Cables-direct | Kategorie: VGA cables | Größe: 0.08 MB |

VGA Extension Cable

Weitere Produkte und Handbücher für VGA-Kabel Cables Direct

Modelle	Dokumententyp
CDEX-801K	Datenblatt Cables Direct SVGA Extension, 1 Seiten
EX-002	Datenblatt Cables Direct EGA Monitor Extension, 1 Seiten
CDEX-237	Datenblatt Cables Direct CDEX-237, 1 Seiten
CDEX-802K	Datenblatt Cables Direct CDEX-802K, 1 Seiten
EX-022	Datenblatt Cables Direct VGA Extension, 1 Seiten
EX-012	Datenblatt Cables Direct EX-012, 1 Seiten
EX-025	Datenblatt Cables Direct VGA, 1 Seiten
CDEX-805K	Datenblatt Cables Direct CDEX-805K, 1 Seiten